Featured
-
Manufacturer of Good Quality Sodium Formate - sodium formate 95% – Pengfa
Physicochemical properties: 1.White powder: Water absorption, a slight smell of formic acid. 2.Melting point: 253℃ 3.Relative density: 1.191g/cm3 4.Solubility: Soluble in glycerin, slightly soluble in alcohol, alcohol, insoluble in ether. Storge 1.Store in a cool, dry, well-ventilated place, avoid direct sunlight, away from heat, acid, water, and humid air. 2.Sealing dry preservation.Lined with plastic sheets are available, and coat woven bag packing. As stipulated in the general chemical sto... -
Factory For Formate - Phosphoric Acid – Pengfa
Physicochemical properties: 1. Colorless transparent liquid,No irritant smell 2.Melting point 42℃; boiling point 261℃. 3.Miscible with water in any ratio Storge: 1. Store in a cool, ventilated warehouse. 2. Keep away from fire and heat sources. 3. The package is sealed. 4. It should be stored separately from easily (combustible) combustibles, alkalis, and active metal powders, and avoid mixed storage. 5. The storage area should be equipped with suitable materials to contain the leakage. Phos... -
OEM China Cas 6131 90 4 - Carbon Source – Pengfa
Carbon source Biochemical pathways Key steps of metabolism Enzymes involved Super Carbon Serine pathway/glycolysis/trihydroxy acid cycle Diversity Diversity Methanol Serine pathway/trihydroxy acid cycle Methanol→Formaldehyde→Serine pathway→Acetyl-CoA→Trihydroxy acid cycle Alpha ketoglutarate dehydrogenase, TCA related enzymes sodium acetate Trihydroxy acid cycle Acetate → Trihydroxy Acid Cycle Citrate synthase, isocitrate dehydrogenase, etc. Ethanol Trihydroxy acid cycle Ethanol→ac... -
China Supplier Acetic Acid 50 - Acetic Acid Solution 10%~80% – Pengfa
Physicochemical properties: 1. Colorless liquid and irritating dour. 2. Solubility water, ethanol, benzene and ethyl ether immiscible, insoluble in carbon disulphide. Storage: 1. Stored in a cool, ventilated warehouse. 2. Keep away from the fire, heat. The cold season should maintain a temperature higher than 16 DEG C, to prevent solidification. During cold season, temperature should be maintained above 16 DEG C to prevent/avoid solidification. 3. Keep the container sealed. Should be separat... -
Best quality Feed Additive Calcium Formate 98% - Feed Grade – Pengfa
Physicochemical properties: 1.White crystal or powder, slightly moisture absorption, taste bitter. Neutral, non-toxic, soluble in water. 2.Decomposition temperature: 400℃ Storage: Storage precautions,Warehouse ventilation and low temperature drying. Use 1. Feed Grade Calcium Formate:Feed Additives 2. Industry Grade Calcium Formate: (1)Construction Use:For cement, as coagulant,lubricant;Forbuilding mortar,to acceleration cement’s hardening. (2)Other Use:For leather, anti-wear materials,e... -
Fast delivery Tech Grade Formic Acid - Formic Acid 85% – Pengfa
Physicochemical properties: 1.Colorless fuming flammable liquid and irritating dour. 2.Melting point: 8.6 ℃; Boiling point: 100.8 ℃; Flash point: 68.9 ℃ 3.Solubility in water, ethanol and ether, slightly soluble in benzene. Storage: 1 .Stored in shade and ventilated warehouse. 2. Keep away from the fire, heat. The reservoir temperature should not exceed 30 , and the relative humidity should not exceed 85%. 3. Keep the container sealed. Must be separated from the oxidant, alkali, active metal ... -
Low MOQ for Acetate Sodium Trihydrate Manufacturer - Sodium Acetate Thihydrate – Pengfa
1. Main indicators: Content: ≥20%, ≥25%, ≥30% Appearance: clear and transparent liquid, no irritating odor. Water insoluble matter: ≤0.006% 2. Main purpose: To treat urban sewage, study the influence of sludge age (SRT) and external carbon source (sodium acetate solution) on the system’s denitrification and phosphorus removal. Sodium acetate is used as a supplementary carbon source to domesticate the denitrification sludge, and then use a buffer solution to control the increase in pH du... -
New Fashion Design for Sodium Acetate 127 9 3 Trihydrate - Liquid Sodium Acetat – Pengfa
1. Main indicators: Content: ≥20%, ≥25%, ≥30% Appearance: clear and transparent liquid, no irritating odor. Water insoluble matter: ≤0.006% 2. Main purpose: To treat urban sewage, study the influence of sludge age (SRT) and external carbon source (sodium acetate solution) on the system’s denitrification and phosphorus removal. Sodium acetate is used as a supplementary carbon source to domesticate the denitrification sludge, and then use a buffer solution to control the increase in pH du... -
High Performance Acid Formic 85% - Formic Acid 85% – Pengfa
Physicochemical properties: 1.Colorless fuming flammable liquid and irritating dour. 2.Melting point: 8.6 ℃; Boiling point: 100.8 ℃; Flash point: 68.9 ℃ 3.Solubility in water, ethanol and ether, slightly soluble in benzene. Storage: 1 .Stored in shade and ventilated warehouse. 2. Keep away from the fire, heat. The reservoir temperature should not exceed 30 , and the relative humidity should not exceed 85%. 3. Keep the container sealed. Must be separated from the oxidant, alkali, active metal ... -
2021 High quality Cement Additive Calcium Formate 98% - Tech Grade – Pengfa
Physicochemical properties: 1.White crystal or powder, slightly moisture absorption, taste bitter. Neutral, non-toxic, soluble in water. 2.Decomposition temperature: 400℃ Storage: Storage precautions,Warehouse ventilation and low temperature drying. Use 1. Feed Grade Calcium Formate:Feed Additives 2. Industry Grade Calcium Formate: (1)Construction Use:For cement, as coagulant,lubricant;Forbuilding mortar,to acceleration cement’s hardening. (2)Other Use:For leather, anti-wear materials,e... -
Special Design for Sodium Acetate Trihydrate For Sale - Sodium Acetate Anhydrous – Pengfa
Physicochemical properties: 1. Colorless and transparent monoclinic prismatic crystal or white crystalline powder, odorless or slightly vinegar smell, slightly bitter, easy to weather in dry and humid air. 2. Solubility water (46.5g/100mL, 20℃, pH of 0.1mol/L aqueous solution is 8.87), acetone, etc., soluble in ethanol, but insoluble in ether. 3.Melting point (℃): 324 Storge 1. Store in a sealed and dry place. 2. Packed with plastic bag lined, woven bag or gunny bag as outer coat. Sodium acet... -
Well-designed Oil Field Drilling Fluid - Phosphoric Acid – Pengfa
Physicochemical properties: 1. Colorless transparent liquid,No irritant smell 2.Melting point 42℃; boiling point 261℃. 3.Miscible with water in any ratio Storge: 1. Store in a cool, ventilated warehouse. 2. Keep away from fire and heat sources. 3. The package is sealed. 4. It should be stored separately from easily (combustible) combustibles, alkalis, and active metal powders, and avoid mixed storage. 5. The storage area should be equipped with suitable materials to contain the leakage. Phos...